Heating Instructions
General Waxing Guides
Heating Instructions
Warming in Roll-on Cartridge Wax Heater
1. Peel off the protective label on cartridge
2. Insert into roll-on wax heater and heat up for 25-30 minutes, depend on ambient temperature
Warming in Wax Heater
1. Put wax beans into removable container. If you do not have container, just put tin wax into heater chamber directly.
2. Insert removable container / tin into wax heater and heat up for at least 45 minutes, depending on ambient temperature, volume and type of wax.
3. When wax becomes soften, gently stir with spatula to ensure the consistency. Otherwise, keep melt until you find the ideal consistency.
General Waxing Guides
Liposoluble Wax
1a. Using cartridge
Leaving the cartridge in the heater, turn upside down, allowing the wax to flow into the roller stand. Holding the unit at an approx. 45 degree angle, apply the wax with the direction of the hair growth.
1b. Using spatula
Dip spatula into the center of the jar, scoop the wax out, and then rotate the spatula to prevent the wax from dripping.
Apply the wax on the area in the same direction of hair growth.
2. Immediately place a cotton strip over the wax and smooth down firmly. Leave lower section of strip 3cm from the skin to avoid sticky fingers.
3. Hold skin taught firmly with one hand. Grip onto the edge of the strip and pull back quickly in the opposite of hair growth as close to the skin as possible.
Stripless Hot Wax
1. Dip spatula into the center of the jar, scoop the wax out, and then rotate the spatula to prevent the wax from dripping.
Apply the wax on the area in the same direction of hair growth.
2. Removing the wax, lift end of wax with fingers of free hand. Grip wax with fast and firm action in the opposite direction of hair growth.
Immediately apply firm pressure to the area with your fingertips to relieve sensitivity after removal.